The pac-10 electrodes have two coils and are suitable for installation on a tube of two inches. Typically, this type of device is used to enter the package and the water heater to prevent sedimentation
The pac-01 sedimentation unit has 2 coils that are suitable for installation on one and one quarter to the bottom of the tube. And can be installed on metal and non-metallic pipes
Pac-12
are suitable for installation on a three-quadrant inch tube. If this hardening device is used on a lower-sized tube, it has a higher depositional capacity
Pac-11
pac-11 is designed for installation in pipes of one and one second inches to the bottom. It has 4 coils that can be installed on metal and non-metallic pipes
pac-32
The pac-32 electrodes are designed to be installed 3 inches to the bottom. It has 4 coils that can be installed on metal and non-metallic pipes
pac-21
The pac-21 is designed for installation by 2 inches to the bottom. It has 4 coils that can be installed on metal and non-metallic pipes
pac-61
The pac-61 is designed for installation by 6 inches to the bottom of the pipe. It has 6 coils that can be installed on metal and non-metallic pipes
pac-41
The pac-41 is designed for installation on pipes 4 inches to the bottom. It has 4 coils that can be installed on metal and non-metallic pipes
pac-101
The pac-101 electronic deposition is designed to be installed on the 10-inch pipeline. It has 10 coils that can be installed on metal and non-metallic pipes
pac-82
The pac-82 electronic deposition is designed to be fitted with 8-inch pipes down. It has 6 coils that can be installed on metal and non-metallic pipes